Secondary Coating Line – There Is Definitely A Lot More Than You Would Think At This Website..

How well do you know fiber optic cables? If you don’t have a lot of information regarding the cables here are a few facts that you should find out about them. Although an FTTH Cable Production Line is manufactured out of glass and a few of its areas require lots of care, an entire fiber was created such that it’s able to withstand even the most rugged installations. For instance, cat 5/5e/6/6A has a pulling tension of 25 pounds. There are other optics that can withstand over 200 pounds of pulling tension.

Research studies have shown that a fiber optic can withstand higher pulling tension than copper. Additionally, it’s rated for larger temperature ranges and is also immune to EM/RFI interference.

Fiber Is A Lot More Secure

Since information and facts are carried in the cable, the information is less risky than in other cables; therefore, it’s hard to hack the details. While it’s difficult to hack the information inside the cables, it doesn’t mean that they can’t be hacked. It is because all you have to do is to achieve the network tap and physical access to the cable and you will be able to hack it.

It’s Simple to Install The Cable

Whilst the cable was challenging to install not too long ago, stuff has changed now as technologies have changed. If you want to install the cable you only have to contact installation professionals and also the cable will likely be installed within a very short time.

The Cables Aren’t Impacted By Environmental Conditions

Considering that the fibers carry light, they aren’t disturbed by changes in temperature, cold, rain or any other environmental condition. This is simply not the case with copper cables that are usually impacted by environmental conditions. For example, when it’s cold, the cables transmit data faster than when it’s hot.

They Support Wireless

The cables are heavily employed by telecommunication companies to hold wireless telephone signals through the towers for the central network. The fibers are liked by a lot of companies due to their large bandwidth and long lasting compatibility using the network equipment.

Much like copper cables, NEC (National Electrical Code) requires FTTH Cable Production Line be marked making use of their fire and smoking ratings. NEC requires all indoor fiber cables be marked correctly and installed properly for its intended use. According to NEC, a building’s inside area is divided into three types of sections: plenums, risers and general purpose areas.

A Plenum area is really a building space used for air flow or air distribution system. In most buildings, the region above a drop ceiling or under a raised floor can be used as the air return (source of air) for that air cooling. Those drop ceiling and raised floors are also where fiber cables are often installed. If those cables were burning, they could produce toxic fumes and the fumes could be fed to all of those other building by the air conditioning unit. Consequently, people might be injured though they are a considerable ways through the fire.


These are some of the facts you need to know about optic cables. When purchasing the units you ought to ensure that you get them from authorized dealers. After buying them you should ensure that you install them professionally. In the event you don’t have the skills you should hire a skilled professional to set up them to suit your needs. We manufacture different eygmcn of optic fiber cable equipment such as Optical cable sheathing line and lots of other equipment. Visit the given links to know more about us.

When performing fusion splicing you will need a Fusion Splicer, fusion splice protection sleeves, and isopropyl alcohol and stripping tools. If you work with a mechanical splice, you will need stripping tools, mechanical splices, isopropyl alcohol and a mechanical splice assembly tool. When hand terminating a fiber you will require 99% isopropyl alcohol, epoxy/adhesive, a syringe and needle, polishing (lapping) film, a polishing pad, a polishing puck, a crimp tool, stripping tools, fiber optic connectors ( or splice on connectors) and piano wire.

Whenever a termination is done you must inspect the end face from the connector with Fiber Coloring Machine. Making sure that light is becoming through either the splice or even the connection, a Visual Fault Locator can be utilized. This device will shoot a visible laser on the fiber cable to help you tell that we now have no breaks or faulty splices. In the event the laser light stops on the fiber somewhere, there is most likely a break in the glass at that time. Should there be more than a dull light showing on the connector point, the termination was not successful. The light should also go through the fusion splice, when it fails to, stop and re- splice or re-terminate.

Leave a Reply

Your email address will not be published. Required fields are marked *